Asmar Red Oxide Primer
A general-purpose alkyd-based primer loaded with non–toxic and anticorrosive pigments for the protection of steel surfaces against moderate corrosive environments. The product offers good leveling and coverage with excellent adhesion on power tool prepared substrates. It is an economical anticorrosive primer
RECOMMENDED USES
It is recommended for steel structures and surfaces in domestic and mildly corrosive environments. It is not suitable for constant water immersion or overcoating of zinc primed steel. It has very good hiding power and can hide minor surface imperfections or Stains on surfaces. It is used for, only air drying purposes. It can be over coated with National Alkyd-based paints.
TECHNICAL DATA
| COLOUR, DRY FILM |
Red – Brown |
| FINISH, DRY FILM |
Smooth / Matt |
| VOLUME SOLIDS
(ASTM D2697) |
54 ± 2% |
| SPECIFIC GRAVITY |
1.50 ± 0.05 |
| THEORETICAL SPREADING |
18 – 13.5 M2 / LTR |
| RECOMMENDED DFT (DRY FILM) |
30 – 40 Microns / Coat |
| RECOMMENDED WFT (WET FILM) |
55 – 75 Microns / Coat |
| FLASHPOINT |
38°C |
DRYING TIME
| Drying time @ 30°C (Temperature, humidity, air movement, film thickness, and number of coats
all affect the drying time.) |
| TOUCH DRY |
30 – 45 minutes |
| *DRY TO RECOAT |
12 hours |
| HARD DRY |
24 hours |
