25%off when you complete your order today.

Search

Asmar Aqua Matt

Asmar Aqua Matt is a premium quality pure acrylic-based topcoat, specifically designed to provide a luxurious rich matt finish with the precision of colors. It provides excellent opacity and whiteness with excellent scrub resistance properties. It offers outstanding coverage and adhesion. It is free from any harmful chemicals and is highly washable. It has very low VOC. It contains anti-bacterial and anti-fungal additives
  • Superior coverage
  • Excellent sanding
  • Excellent adhesion
  • Interior and exterior
Where to use
Substrates:   Interior: Suitably prepared brick, concrete, masonry, paper-faced plasterboard, set plaster, timber, and pre-painted surfaces. Interior walls; bedrooms, dining areas, living areas, and lounge areas.
  TECHNICAL DATA  
COLOUR, DRY FILM As per Asmar Shade Card
FINISH, DRY FILM Smooth, Matt
VOLUME SOLIDS (ASTM D2697) 42 ± 2%
SPECIFIC GRAVITY 1.50 ± 0.04 (For white and pastel colors)
THEORETICAL SPREADING 11.0 – 13.0m2/ltr/coat
RECOMMENDED DFT (DRY FILM) 30 – 50 microns/coat
RECOMMENDED WFT (WET FILM) 71 – 119 microns/coat
FLASHPOINT Water-based
  .

Asmar Wall Putty

Asmar Wall Putty Asmar Wall Putty is vinyl-PVA copolymer emulsion-based putty, with inert graded filler, developed for filling and leveling the porosity and surface imperfections. It is a general-purpose filler for interior/exterior surfaces and is not recommended for sanding. It provides a leveled surface with excellent adhesion and low volume shrinkage. It will help to reduce topcoat consumptions of the system considerably, on porous surfaces. It contains anti-fungal and anti-bacterial additives.  RECOMMENDED USES Asmar Wall Putty can be used as body filler for interior surfaces like hollow concrete blocks, plaster, brickwork, etc. It is recommended for leveling and filling the surface imperfections and porosity, so as to get a smooth and leveled surface for the subsequent coating system. At normal conditions, there is no need for a further primer coat over National Block Filler, prior to topcoat. It is always recommended to apply a suitable topcoat on block filler.

TECHNICAL DATA

 
APPEARANCE Non-flowing white paste
COLOUR, DRY FILM Off white
FINISH, DRY FILM Medium fine / Matt
VOLUME SOLIDS (ASTM D2697) 70 ± 2%
SPECIFIC GRAVITY 1.55 ± 0.05
THEORETICAL SPREADING 6.0 – 7.0 M2/Kgs/Coat
RECOMMENDED DFT (DRY FILM) 250 – 500 Microns/Coat
RECOMMENDED WFT (WET FILM) 355 – 715 Microns/Coat
FLASHPOINT Water Base
Asmar Aqua Primer

Asmar Aqua Primer

Asmar Aqua Primer  Asmar Aqua Primer is an all-purpose, high-density water-based primer and undercoat for use on interior and exterior timber, masonry, wallboards, and previously painted surfaces. It has outstanding hiding, filling and sanding properties is rapid drying and can be over coated with water and oil-based finishes Asmar Aqua Primer
  • Superior coverage
  • Excellent sanding
  • Excellent adhesion
  • Interior and exterior
Features and benefits Asmar Aqua Primer water-based Primer that is low-odor, low-VOC, lead-free, and has outstanding color retention. Also formulated to be antibacterial, it protects your walls from potentially harmful bacteria such as E. coli and Salmonella. It dries to a Smooth finish that imparts a sense of warmth and depth to your living space and provides a surface that is distinctively smooth to the touch. With surface protectors, oil and dirt cannot easily stick to the walls, making it easy to wipe off common everyday stains. Recommended use   Recommended Substrate Conditions & Preparation Surfaces are to be suitably prepared in accordance with proper trade practices. Ensure the surface is clean, dry, and free from dust, dirt, and grease. Remove loose, peeling, or flaking material. Sand the surface smoothly and remove all dust. Sand enamel-painted surfaces to remove the gloss. Fill holes and cracks with a suitable filler and sand lightly to an even finish. All new cement surfaces need to be fully cured (typically 4–6 weeks) prior to painting. Ensure surfaces are free of bond breakers, formwork release TECHNICAL DATA  
COLOUR, DRY FILM White
FINISH, DRY FILM Smooth / Matt
VOLUME SOLIDS (ASTM D2697) 35 ± 2%
SPECIFIC GRAVITY 1.37 ± 0.05
THEORETICAL SPREADING 11.5 – 10.0 M2/LTR/Coat

Asmar Red Oxide Primer

Asmar Red Oxide Primer A general-purpose alkyd-based primer loaded with non–toxic and anticorrosive pigments for the protection of steel surfaces against moderate corrosive environments. The product offers good leveling and coverage with excellent adhesion on power tool prepared substrates. It is an economical anticorrosive primer   RECOMMENDED USES It is recommended for steel structures and surfaces in domestic and mildly corrosive environments. It is not suitable for constant water immersion or overcoating of zinc primed steel. It has very good hiding power and can hide minor surface imperfections or Stains on surfaces. It is used for, only air drying purposes. It can be over coated with National Alkyd-based paints. TECHNICAL DATA  
COLOUR, DRY FILM Red – Brown
FINISH, DRY FILM Smooth / Matt
VOLUME SOLIDS (ASTM D2697) 54 ± 2%
SPECIFIC GRAVITY 1.50 ± 0.05
THEORETICAL SPREADING 18 – 13.5 M2 / LTR
RECOMMENDED DFT (DRY FILM) 30 – 40 Microns / Coat
RECOMMENDED WFT (WET FILM) 55 – 75 Microns / Coat
FLASHPOINT 38°C
DRYING TIME  
Drying time @ 30°C (Temperature, humidity, air movement, film thickness, and number of coats all affect the drying time.)
TOUCH DRY 30 – 45 minutes
*DRY TO RECOAT 12 hours
HARD DRY 24 hours
Back to Top
Product has been added to your cart